stable/sysdig

DEPRECATED - Sysdig

This chart is deprecated and moved to its new home:

GitHub repo: https://github.com/sysdiglabs/charts

Charts repo: https://charts.sysdig.com

Sysdig is a unified platform for container and microservices monitoring, troubleshooting, security and forensics. Sysdig platform has been built on top of Sysdig tool and Sysdig Inspect open-source technologies.

Introduction

This chart adds the Sysdig agent for Sysdig Monitor and Sysdig Secure to all nodes in your cluster via a DaemonSet.

Prerequisites

• Kubernetes 1.9+ with Beta APIs enabled

Installing the Chart

To install the chart with the release name my-release, retrieve your Sysdig Monitor Access Key from your Account Settings and run:

$ helm install --name my-release --set sysdig.accessKey=YOUR-KEY-HERE stable/sysdig

After a few seconds, you should see hosts and containers appearing in Sysdig Monitor and Sysdig Secure.

Tip: List all releases using helm list

Uninstalling the Chart

To uninstall/delete the my-release deployment:

$ helm delete my-release

Tip: Use helm delete –purge my-release to completely remove the release from Helm internal storage

The command removes all the Kubernetes components associated with the chart and deletes the release.

Configuration

The following table lists the configurable parameters of the Sysdig chart and their default values.

Parameter	Description	Default
image.registry	Sysdig Agent image registry	docker.io
image.repository	The image repository to pull from	sysdig/agent
image.tag	The image tag to pull	10.0.0
image.pullPolicy	The Image pull policy	IfNotPresent
image.pullSecrets	Image pull secrets	nil
resources.requests.cpu	CPU requested for being run in a node	600m
resources.requests.memory	Memory requested for being run in a node	512Mi
resources.limits.cpu	CPU limit	2000m
resources.limits.memory	Memory limit	1536Mi
rbac.create	If true, create & use RBAC resources	true
serviceAccount.create	Create serviceAccount	true
serviceAccount.name	Use this value as serviceAccountName
daemonset.updateStrategy.type	The updateStrategy for updating the daemonset	RollingUpdate
daemonset.affinity	Node affinities	schedule on amd64 and linux
daemonset.annotations	Custom annotations for daemonset	{}
slim.enabled	Use the slim based Sysdig Agent image	false
slim.kmoduleImage.repository	The kernel module image builder repository to pull from	sysdig/agent-kmodule
slim.resources.requests.cpu	CPU requested for building the kernel module	1000m
slim.resources.requests.memory	Memory requested for building the kernel module	348Mi
slim.resources.limits.memory	Memory limit for building the kernel module	512Mi
ebpf.enabled	Enable eBPF support for Sysdig instead of sysdig-probe kernel module	false
ebpf.settings.mountEtcVolume	Needed to detect which kernel version are running in Google COS	true
sysdig.accessKey	Your Sysdig Monitor Access Key	Nil You must provide your own key
sysdig.settings	Settings for agent’s configuration file
secure.enabled	Enable Sysdig Secure	true
auditLog.enabled	Enable K8s audit log support for Sysdig Secure	false
auditLog.auditServerUrl	The URL where Sysdig Agent listens for K8s audit log events	0.0.0.0
auditLog.auditServerPort	Port where Sysdig Agent listens for K8s audit log events	7765
auditLog.dynamicBackend.enabled	Deploy the Audit Sink where Sysdig listens for K8s audit log events	false
customAppChecks	The custom app checks deployed with your agent	{}
tolerations	The tolerations for scheduling	node-role.kubernetes.io/master:NoSchedule
scc.create	Create OpenShift’s Security Context Constraint	false

Specify each parameter using the --set key=value[,key=value] argument to helm install. For example,

$ helm install --name my-release \
    --set sysdig.accessKey=YOUR-KEY-HERE,sysdig.settings.tags="role:webserver\,location:europe" \
    stable/sysdig

Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example,

$ helm install --name my-release -f values.yaml stable/sysdig

Tip: You can use the default values.yaml

On-Premise backend deployment settings

Sysdig platform backend can be also deployed On-Premise in your own infrastructure.

Installing the agent using the Helm chart is also possible in this scenario, and you can enable it with the following parameters:

Parameter	Description	Default
sysdig.settings.collector	The IP address or hostname of the collector
sysdig.settings.collector_port	The port where collector is listening
sysdig.settings.ssl	The collector accepts SSL	true
sysdig.settings.ssl_verify_certificate	Set to false if you don’t want to verify SSL certificate	true

For example:

$ helm install --name my-release \
    --set sysdig.accessKey=YOUR-KEY-HERE \
    --set sysdig.settings.collector=42.32.196.18 \
    --set sysdig.settings.collector_port=6443 \
    --set sysdig.settings.ssl_verify_certificate=false \
    stable/sysdig

Using private Docker image registry

If you pull the Sysdig agent Docker image from a private registry that requires authentication, some additional configuration is required.

First, create a secret that stores the registry credentials:

$ kubectl create secret docker-registry SECRET_NAME \
  --docker-server=SERVER \
  --docker-username=USERNAME \
  --docker-password=TOKEN \
  --docker-email=EMAIL

Then, point to this secret in the values YAML file:

sysdig:
  accessKey: YOUR-KEY-HERE
image:
  registry: myrepo.mydomain.tld
  repository: sysdig-agent
  tag: latest-tag
  pullSecrets:
    - name: SECRET_NAME

Finally, set the accessKey value and you are ready to deploy the Sysdig agent using the Helm chart:

$ helm install --name my-release -f values.yaml stable/sysdig

You can read more details about this in Kubernetes Documentation.

Modifying Sysdig agent configuration

The Sysdig agent uses a file called dragent.yaml to store the configuration.

Using the Helm chart, the default configuration settings can be updated using sysdig.settings either via --set sysdig.settings.key = value or in the values YAML file. For example, to eanble Prometheus metrics scraping, you need this in your values.yaml file::

sysdig:
  accessKey: YOUR-KEY-HERE
  settings:
    prometheus:
      enabled: true
      histograms: true

$ helm install --name my-release -f values.yaml stable/sysdig

Upgrading Sysdig agent configuration

If you need to upgrade the agent configuration file, first modify the YAML file (in this case we are increasing the metrics limit scraping Prometheus metrics):

sysdig:
  accessKey: YOUR-KEY-HERE
  settings:
    prometheus:
      enabled: true
      histograms: true
      max_metrics: 2000
      max_metrics_per_process: 400

And then, upgrade Helm chart with:

$ helm upgrade my-release -f values.yaml stable/sysdig

How to upgrade to the last version

First of all ensure you have the lastest chart version

$ helm repo update

In case you deployed the chart with a values.yaml file, you just need to modify (or add if it’s missing) the image.tag field and execute:

$ helm install --name sysdig -f values.yaml stable/sysdig

If you deployed the chart setting the values as CLI parameters, like for example:

$ helm install \
    --name sysdig \
    --set sysdig.accessKey=xxxx \
    --set ebpf.enabled=true \
    --namespace sysdig-agent \
    stable/sysdig

You will need to execute:

$ helm upgrade --set image.tag=<last_version> --reuse-values sysdig stable/sysdig

Adding custom AppChecks

Application checks are integrations that allow the Sysdig agent to collect metrics exposed by specific services. Sysdig has several built-in AppChecks, but sometimes you might need to create your own.

Your own AppChecks can deployed with the Helm chart embedding them in the values YAML file:

customAppChecks:
  sample.py: |-
    from checks import AgentCheck

    class MyCustomCheck(AgentCheck):
        def check(self, instance):
            self.gauge("testhelm", 1)

sysdig:
  accessKey: YOUR-KEY-HERE
  settings:
    app_checks:
      - name: sample
        interval: 10
        pattern: # pattern to match the application
          comm: myprocess
        conf:
          mykey: myvalue

The first section, dumps the AppCheck in a Kubernetes configmap and makes it available within the Sysdig agent container. The second, configures it on the dragent.yaml file.

Once the values YAML file is ready, we will deploy the Chart like before:

$ helm install --name my-release -f values.yaml stable/sysdig

Automating the generation of custom-app-checks.yaml file

Sometimes editing and maintaining YAML files can be a bit cumbersome and error prone, so we have created a script for automating this process and make your life easier.

Imagine that you have custom AppChecks for a number of services like Redis, MongoDB and Traefik.

You have already a values.yaml with just your configuration:

sysdig:
  accessKey: YOUR-KEY-HERE
  settings:
    app_checks:
      - name: myredis
        [...]
      - name: mymongo
        [...]
      - name: mytraefik
        [...]

You can generate an additional values YAML file with the custom AppChecks:

$ git clone https://github.com/kubernetes/charts.git
$ cd stable/sysdig
$ ./scripts/appchecks2helm appChecks/solr.py appChecks/traefik.py appChecks/nats.py > custom-app-checks.yaml

And deploy the Chart with both of them:

$ helm install --name my-release -f custom-app-checks.yaml -f values.yaml stable/sysdig